ABARTH 500 / 595 / 695 (312) 1.4 180 HP (08-) Lowering Suspension Eibach Sportline STR.T EKO-SST-30-013-01-22

CHF776.00 *

Ready to ship today,
Delivery time appr. 1-3 workdays

Order number: EKO-SST-30-013-01-22
Drive type: Front-wheel drive
Model type: ZFA
Model year: 2008-08
Performance: 180 PS / 132 KW
Displacement: 1368 cm³
Engine: Benzin / 312 A1.000;312 A3.000
Construction type: Schrägheck
Axle loads front up to: 830 Kg
Axle loads rear up to: 640 Kg
Lowering Front Axle: 40 mm
Lowering rear axle: 30 mm
CH-Certificate:

Included

Maximum Performance and Driving Fun for Everyone! The Eibach Sportline STRT KIT is the... more

Product information "ABARTH 500 / 595 / 695 (312) 1.4 180 HP (08-) Lowering Suspension Eibach Sportline STR.T EKO-SST-30-013-01-22"

Maximum Performance and Driving Fun for Everyone!

The Eibach Sportline STRT KIT is the ultimate companion for anyone looking to elevate their vehicle to a new level of performance without breaking the bank. This innovatively designed sport suspension offers a combination of Eibach Sportline lowering springs and KONI STRT shock absorbers, creating an unbeatable synergy in terms of stability, comfort, and performance.

Developed and tuned for specific vehicle models, the Sportline STRT KIT provides a customized adjustment that is optimally tailored to your driving requirements. Depending on your vehicle's model and type, the kit allows for an impressive lowering of up to 40 mm. This not only enhances the appearance but also provides a sportier and more agile driving experience, particularly noticeable in fast cornering.

The use of high-strength materials ensures durability and lasting performance, so you can rely on a product that withstands even the most extreme conditions. Installation is quick and straightforward, thanks to the included instructions and necessary accessories.

So, if you are looking for an affordable entry into the tuning world without compromising on quality and cutting-edge technology, the Eibach Sportline STRT KIT is the perfect choice for you. Experience maximum performance and ultimate driving fun without compromise.

Spare part designation rear axle	F21-30-013-01-HA, 8050-1146
Replacement part designation front axle	F21-30-013-01-VA 8750-1127L 8750-1127R
Installation location	Front axle & rear axle

Related links to "ABARTH 500 / 595 / 695 (312) 1.4 180 HP (08-) Lowering Suspension Eibach Sportline STR.T EKO-SST-30-013-01-22"

Close menu

Scope of delivery
2x Vorderachsfedern
2x Hinterachsfedern
2x Vorderachsdämpfer
2x Hinterachsdämpfer
1x Schweizer Gutachten

Close menu

ID	Description
A	General Notes on Eibach Suspension Systems: Unless otherwise stated, for vehicles that are factory-equipped with a sport suspension, the lowering / raising specified in the catalog is reduced by the amount of the factory lowering / raising. Unless otherwise stated, vehicles that are factory-equipped with a raised suspension (e.g., off-road character, crossover, or rough terrain packages) are excluded from using our products. Please check before installation using the certificate whether the delivered items (see part identification) are approved for your vehicle (see application area). We recommend that the installation of our products be carried out only by a qualified workshop that has appropriately trained personnel and the necessary special tools. You can "read" the installation position from the printing; install the spring so that you can read the printing. - The number must not be "upside down". After the installation of the spring/suspension components, a verification of the wheel alignment values is absolutely necessary. If the stock shock absorbers are no longer fully functional and have noticeably lost their effectiveness, we strongly recommend replacing them with new stock shock absorbers or sport shock absorbers. For Sportline springs, we recommend the installation of sport shock absorbers such as KONI Sport, KONI STRT, or Bilstein B8. All wheel/tire combinations approved by the wheel type testing authorities can be used. The requirements in the wheel certificate must be adhered to, with the exception of the demand for stock suspension. Depending on the engine, transmission, equipment, and tolerances of the vehicle, the lowering or raising may deviate by a few mm from the specified values. The amount of lowering or raising is always reduced by the amount of a factory lowering or raising. The usability of Eibach products refers to vehicles that remain stock. In the case of modifications and special equipment (this also applies to stock accessories!) such as the installation of a special braking system (e.g., ceramic brake system), wheel central locking, sport suspension, LPG system, etc., Eibach products may not be used. The specified measurements refer to stock new vehicles. Measurement points: Vertical distance from the center of the wheel hub to the lower edge of the fender. In principle, the specified measurements are target values, which may vary depending on the vehicle.

Description

General Notes on Eibach Suspension Systems:

Unless otherwise stated, for vehicles that are factory-equipped with a sport suspension, the lowering / raising specified in the catalog is reduced by the amount of the factory lowering / raising. Unless otherwise stated, vehicles that are factory-equipped with a raised suspension (e.g., off-road character, crossover, or rough terrain packages) are excluded from using our products.
Please check before installation using the certificate whether the delivered items (see part identification) are approved for your vehicle (see application area).
We recommend that the installation of our products be carried out only by a qualified workshop that has appropriately trained personnel and the necessary special tools.
You can "read" the installation position from the printing; install the spring so that you can read the printing. - The number must not be "upside down".
After the installation of the spring/suspension components, a verification of the wheel alignment values is absolutely necessary.
If the stock shock absorbers are no longer fully functional and have noticeably lost their effectiveness, we strongly recommend replacing them with new stock shock absorbers or sport shock absorbers.
For Sportline springs, we recommend the installation of sport shock absorbers such as KONI Sport, KONI STRT, or Bilstein B8.
All wheel/tire combinations approved by the wheel type testing authorities can be used. The requirements in the wheel certificate must be adhered to, with the exception of the demand for stock suspension.
Depending on the engine, transmission, equipment, and tolerances of the vehicle, the lowering or raising may deviate by a few mm from the specified values. The amount of lowering or raising is always reduced by the amount of a factory lowering or raising.
The usability of Eibach products refers to vehicles that remain stock. In the case of modifications and special equipment (this also applies to stock accessories!) such as the installation of a special braking system (e.g., ceramic brake system), wheel central locking, sport suspension, LPG system, etc., Eibach products may not be used. The specified measurements refer to stock new vehicles. Measurement points: Vertical distance from the center of the wheel hub to the lower edge of the fender. In principle, the specified measurements are target values, which may vary depending on the vehicle.